The Stencil Gluing Machine can be supplied in numerous working widths. The sheets are glued from above with a three roller system. With positioning accuracy the glue application on the material is made with a rubber stencil which is fixed to the stencil roller. The manual feeding of sheets is made by a pusher bar which is synchronised with the speed of the stencil roller. For working of paperboard a pressing roller device belongs to the standard equipment of the machine. After the glue application process the sheets are delivered automatically onto a conveyer belt of 3 meter length enabling a further operation from both sides of the belt. The machine is available for cold glue processing only. If large quantities of glue are to be used, it is recommended to have installed a glue circulation pump together with an automatic glue level control.
for glue application on cardboard, etc.
gluing from above
with three roller system, for the use of cold adhesive
| electrical equipment A.C. motor | 400 volts, 3 ph., 50 cycles, 0,75 kW |
| format sizes | min 100 x 110 mm max. working width x 600 mm |
| stencil roller | Ø 240 mm |
| brass-rollers | Ø 132 / 60 (80) mm |
| standard accessory | pressure roller device |
| conveyor belt - standard | 3 meters length |
| speed | infinitely variable |
| working width 500 mm weight |
140 x 480 x 140 cm 460 kg |
| working width 700 mm weight |
160 x 480 x 140 cm 500 kg |
| working width 800 mm weight |
160 x 480 x 140 cm 570 kg |
| working width 1000 mm weight |
190 x 480 x 140 cm 610 kg |
| working width 1200 mm weight |
210 x 480 x 140 cm 670 kg |
© Karl Tränklein GmbH | Maschinenfabrik | Ringstr. 2 | D-71101 Schönaich
Fon +49 7031 7567-0 | Fax +49 7031 7567-50 | info@karl-traenklein.de | www.karl-traenklein.de